skip to main | skip to sidebar

Thursday, March 15, 2012

IGBT Test Procedures

The term IGBT is an acronym for Insulated Gate Bipolar Transistor. It can be thought of as a Transistor with a MOSFET front end. It has three terminals (or leads) labeled Gate, Collector and Emitter. Some IGBT's have a built in protection diode. This diode is connected across the Collector and Emitter terminals. It is added for transient voltage protection when the IGBT is switching Inductive loads.

When these devices are considered 'suspect' it is necessary to validate their operation through a functional test procedure. One of two methods can be used:

Brother

The first test method will validate the condition of the protection diode, and the resistance of the Collector and Emitter terminals. It is not a definitive test, but will find 80% of all faulty devices. This is due to the fact that most faulty IGBT's show a low resistance or short across the Collector and Emitter terminals when the device is stressed.

To perform this test will require a DVM (Digital-Volt-Meter). Set the DVM to the Diode Test position, and confirm that the device tests as follows:

Attach the Red Lead of the DVM to the Collector Terminal and Black Lead to the Emitter Terminal. Confirm an open circuit condition.

Attach the Red Lead of the DVM to the Emitter Terminal and Black Lead to the Collector Terminal. Confirm an open circuit condition (IGBT without a protection diode). If the DVM displays a forward voltage drop of 0.2 to 0.8 VDC it means that the IGBT has a built in protection diode. Both of these results are normal test conditions and are used to confirm whether the IGBT has a protection diode, and if it does, whether it is functional or not.

The second test method will check the IGBT's functionality, by gating the device. To perform this test will require an IGBT Tester. Confirm that the device tests as follows:

Attach the IGBT Tester leads to the Gate, Collector and Emitter Terminals. Confirm that the device Conduction LED is not lit.

Press the Test Button, and confirm that the Conduction LED lights.

Reverse the Collector and Emitter leads. Do not press the Test Button. If the Conduction LED lights the IGBT has a built in protection diode. This is a normal test condition for this type of device. If the Conduction LED does not light then the IGBT does not have a built in protection diode. This is also a normal test condition for this type of device.

It is important to note that Functional test of the IGBT should always be performed when the device is out-of-circuit. In other words, it should be removed from the product and have no other electrical connections in place, other than those outlined in the Test procedure.

IGBT Test Procedures

http://designerjewelryrings.blogspot.com/ http://buybeautybathingaccessories.blogspot.com/

Tuesday, March 13, 2012

How to Make A Great Press Kit - A Musician's Guide

As an owner of an independent record label, I often get asked how to put together a great press kit. I have found that young musicians understand their music, but are often intimidated by the marketing end of the business. In this article I will help you figure out how to position yourself, whether you are a Latin female vocalist building her base, or an upstart garage band just looking for a break.

What is a Press Kit:

Brother

First of all, there is nothing magical about the term "press kit". All we are talking about is a little background on you/your band, some basic facts, good quotes about your music, a couple of good pictures, and a sample of your music. You will use this to send to newspapers, lawyers, radio stations, A&R reps, promoters, and anyone else who is willing to spend five minutes reviewing your material. Additionally, on the internet you will hear about an electronic press kit, or EPS. An EPS is the exact same thing as a conventional press kit, except it is downloadable as an electronic file instead of a hardcopy form which must be mailed.

The main purpose of the press kit is to generate interest in the artist and their music.

What to include:

Include a limited amount of background information on yourself. It is fine to say where you are from, but no one really wants to hear about every singing performance you did during elementary school. Sometimes less is more.

Talk about your music. Who do you sound like, and who does your music remind people of. The reader needs to be able to have a good idea of what your music sounds like just from your description. Be thoughtful and feel free to be a little funny here (but stay professional). Saying something like your band sounds like a cross between "Maroon 5 and Green Day after 20 cups of coffee" helps the reader understand. Remember, if you don't generate enough interest in the first minute, they will never listen to your demo.

Talk about what you are good at. What makes your band special and different from others? What skills and experiences do you bring to the table? Remember if you are looking for a record deal, you need to prove to your reader that you have all the right ingredients for them to spend hundreds of thousands of dollars marketing you. Launching a new artist is risky, so you need to help the record exec understand why you are a solid investment.

Include quotes and/or press clippings as you generate them. A good quote from a reputable source (not your brother-in-law) can add a lot of credibility to your press kit. It lets the reader know that you have already been reviewed and your material is worth listening to. Ninety percent of press kits unfortunately end up in the trash, some good quotes and positive reviews can create the momentum necessary to get heard, and who knows - maybe even become famous.

You can go with one page dedicated to a bio (biography), and a separate page focused on quotes about your music, or you can combine the two into what some people call a "one pager". My personal preference is to boil everything down to a tight one pager. My desk gets cluttered and papers get separated. If you have you quotes separate from your bio, there is a possibility that I could misplace one or the other. With the advent of digital photography and high quality color printers, it is even possible to include a small picture on your one pager to make it even more complete.

Make sure the overall language and tone of the press kit is consistent with your image. If you have someone help you write your bio, make sure they have heard you music and know what you are all about before they hand you something that might sound great, but isn't about the real you.

Include a couple of different 8x10 pictures that show off different features about you and your band. Include shots that would be appropriate in a news article, but also highlight your key assets from a visual perspective. Your press kit should look professional, but your pictures should reflect your style and music, so you pictures can be much more crazy and creative. Make sure you clearly label the picture with you name and contact information.

If you don't have good pictures of your band, one of the best ways to get some is to go to a modeling agency and ask for a referral to a good local photographer. These photographers are often willing to do some great work for around 0 for the whole package. Make sure you get an agreement upfront that you own the copyrights after the shot and get the high resolution digital images on CD (with a copyright release you can print these photos at any major retailer). A photographer who does work with models is very different from a photographer who takes family pictures. They have a much better idea of what you want, they will encourage your creativity, and they are much more willing to give you the copyrights.

A current gig sheet can also be useful showing where you have recently played and where you are playing in the near future. This can demonstrate that the music is current and has a following in the community.

And of course, your music. Send a high quality CD demo, preferably mastered if you budget permits. Avoid burning your own CD on your home computer with a stick on label - it looks cheap. There are many new CD duplication services on the internet that will manufacture you CD with a printed color insert, and on disc printing even if you only want a few copies (CD replication is for batches over 1,000 but CD duplication is for batch sizes as small as 1). Expect to pay around a retail ready disc for 1-5 CDs, with prices dropping off for larger batches. Make sure you clearly label the CD and the case with you name and contact information. The worst thing in the world that could happen is that they love your music, but they have already lost the rest of the press kit and don't remember the name of the band.

What Not to Include:

Don't oversell yourself. Saying that you are the greatest band that ever lived, might be true, but it probably isn't. Be positive and promote yourself, but focus on statements that are credible. People in the music business hear hype all of the time, and for the most part are numb to it. Hype is good to use with the general public on things like posters (they often believe it), but your press kit reader is more sophisticated and will see it as cheap theatrics.

Including too much of your personal history can make you seem like an amateur with nothing meatier to talk about. Your reader wants to understand your music today, only your psychologist needs to know about every little detail of your childhood.

Don't include anything that makes you look too desperate. You want to come across as a quality professional artist. Remember, you make great music. If your band is called the Chicken Heads, then it might be cute to include a rubber chicken in the box, but otherwise I would stick to the basics - bio, quotes, gig sheet, pictures, and music.

How to Package It:

Include a professional looking, personalized cover letter targeted at the person you are sending the press kit to. Your message needs to be different if you are sending it to an A&R rep at a label seeking a record deal, versus sending it to your local newspaper for a review in their music section. Be brief and to the point. Also, be clear and state exactly what you would like from them.

Put it all together in an organized package. Since you are most likely mailing your press kits, make sure that the CD does not bend the photos, and that your kit will arrive looking the way you intend. You may even want to test a press kit (send it across the country to a wrong address, and then it will come back to your return address) to evaluate your packaging.

Your Music Is Art, But Your Press Kit Is Business:

Remember, be professional. The person you are sending this press kit to probably gets hundreds of them, most of them are garbage (and that's where they end up too). Your music can be crazy and wild, but your press kit needs to be more business like. You are asking someone to spend their valuable time reviewing your material. You may also be asking them to enter into a high risk expensive financial relationship with you. The person you are dealing with is in the music business, they need to make a living. The only way they can do that is to deal with real talent. By presenting a professional package you give them confidence that you are dedicated to making great music, and not just messing around.

A Word About Unsolicited Press Kits:

Avoid wasting your time and money sending a press kit to someone you have not talked with already. Always call and make contact first, ask who you should send it to and what their process is. If possible, have someone who knows the person act as an intermediate and make the initial introduction (this can work wonders). The music business is all about contacts, create and leverage your network. After sending your press kit, call in a couple of weeks and follow up to make sure they received it and got a chance to review it.

Example:

To see a good example of a press kit, go to Legend Vega's website at [http://www.legendvega.com].

How to Make A Great Press Kit - A Musician's Guide

http://buyshoesasics.blogspot.com/

Sunday, March 11, 2012

Brother SE400 Computerized Embroidery Sewing Machine Review

The Brother SE400 Computerized Embroidery Sewing Machine takes the SE350 up a notch by adding a USB port so you can download embroidery patterns and stitches and update your machine through your laptop or computer.

For its price range, this is a phenomenally functional machine - bordering on professional use due to the wide variety of features and sewing types that can be performed.

Brother

Brother SE400 Stitch Patterns
Because this is a combination sewing and embroidery machine, there are loads of stitches to accomplish either type of sewing. There are 67 general utility and sewing stitches such as 10 styles of 1-step buttonholes, Straight, Zigzag, Overcasting, BlindHem, Applique, Stretch, Patchwork, Quilting, Eyelet, Smocking, Decorative, Heirloom stitches and Side Cutter stitches. (Side Cutter stitches cut the fabric off at the seam during sewing similar to what a serger does for seam edges.)

Those stitches can be modified by adjusting the width or height or applying a mirror, twin or multi-directional stitch function.

For embroidery, there are 70 built-in embroidery designs including flowers, roses, baskets of flowers, animals, plants and birds. You choose the pattern and the machine will guide you through step-by-step including thread color selection. The LCD screen shows how much time it will take to complete each step.

Letters and characters used for embroidery and monogramming are excellent additions to today's sewing machines and the Brother SE400 includes 5 different fonts.

There are 10 styles of frame stitches you can use as a border around your work including a square, circle, and diamond and 12 different stitch styles to use in sewing those frames for a total of 120 frame options.

Brother SE400 Presser Feet
The Brother SE400 comes with 8 snap-on presser feet: Buttonhole, Overcasting, Monogramming, Zipper, Zigzag, Blind Stitch, Button Fitting, and the Embroidery foot.

Most product listings describe the machine as having only 7 presser feet but are not counting the embroidery foot in the equation.

The Zigzag foot has a leveling button to help it maneuver over thick seams or fabric edges (as is often necessary when hemming denim for jeans).

The presser foot height has 3 settings: down, regular up, and extra up for slipping thick fabrics under the presser foot.

Brother SE400 Features
Using some of the best technology for thread delivery and even stitching, the Brother SE 400 also includes automatic features to make machine set up as easy as possible and push button controls that handle things like thread cutting and bobbin winding.

Thread delivery is horizontal, the bobbin is a Quick-Set drop in style casing, and the feed dogs have seven points of contact for optimum fabric control.

There is an automatic needle threader, the ability to drop the feed dogs, and upper thread and bobbin sensors tell you when your thread had broken or is running low.

Push buttons are conveniently located for programming the needle to stop in the up or down position, a Start/Stop button, speed control slider, and a Reverse/Reinforcement stitch button.

All settings take place through the use of the Brother SE400's touch screen panel and nice sized icons display stitch patterns and directions.

Embroidering with the machine requires that you remove the extension table and slide the included embroidery unit onto the machine. Then place your fabric in the embroidery frame and ensure the right needle, thread, and presser foot are in place.

On the side of the machine is an embroidery card slot so you can purchase sets of embroidery designs to expand your library of artwork.

The Brother SE 400 embroidery sewing machine with USB port and embroidery card reader offers incredible functionality and value.

Brother SE400 Computerized Embroidery Sewing Machine Review

http://buybastvanitiesvanitybenches.blogspot.com/

Friday, March 9, 2012

India- Why Diwali Is Celebrated?

Indians celebrate Diwali with great passion. They fire lots of firecrackers and eat sweets and wear new clothes. Why is Diwali so important in India?

Diwali is the day when it is said that Lord Rama returned to his kingdom Ayodhya after conquering Lanka. Lord Rama was asked by his father Dashrath to go to the wild forests for fourteen long years. In the forest Ravana, the king of Lanka, abducted his queen Seeta. Lord Rama was along in the jungle with only his brother Laxaman with him. In the forests Lord Rama met the monkey king Sugriva.

Brother

Sugriva sent monkeys around the world to search for mother Seeta. Finally Lord Hanumana found Seeta in the kingdom of Ravana at Lanka. He burnt Lanka and came back to inform Lord Rama about mother Seeta. Lord prepared a large army of monkeys and bears and invaded Lanka. Ravana was defeated. Vibhishan the brother of Ravana had joined Lord Rama in the battle. After defeating Ravana Lord Rama returned to Ayodhya his kingdom after fourteen long years.

Indian Hindus celebrate Diwali as a day of celebration. Candles are burnt in every home. People clean their homes and wear new clothes. Sweets are shared and people wish each other. Diwali is the biggest festival of India that celebrates the victory of good over the evil. Indians all over the world celebrate Diwali and it is also the beginning of new year as per the Hindu calendar.

India- Why Diwali Is Celebrated?

http://buyshoptoilets.blogspot.com/ http://buyshoesasics.blogspot.com/ http://buyequestrian-sports.blogspot.com/

Tuesday, March 6, 2012

Do You Know How To Deal With People Who Mock And Ridicule You?

FACT: The Entrepreneur Is Without “Honour” Among Those Who "Know" Him

One of the greatest realities you may have to face(there are exceptions, as is the case with everything in life), when you formally announce to the world that you have become an entrepreneur, is that you do NOT know many people you think you know, as well as you think you do.

Brother

Godfrey Heron([http://www.irieisleonline.com]) in his Entrepreneur's Survival Checklist described this shocking experience quite accurately when he wrote that people you love - friends, relatives, your spouse - will openly doubt you and sometimes even "predict" your failure.

In their eyes, you are just the same person they have always known and grown up with. People close to us seem to find it easier to think of us in terms of our past failures and weakest moments - the growing up years, and all the mistakes we made while trying to discover ourselves. They often miss the tremendous changes that have taken place inside us following from those experiences, especially AFTER we left home and explored the outside world on our own.

"The reasonable man adapts himself to the world; the unreasonable man persists in trying to adapt the world to himself. Therefore, all progress depends on the unreasonable man." -- George Bernard Shaw

My personal experiences confirm this. People who know you always think if they cannot see in you the potential for success in what you say you want to do, then it has to mean you cannot possibly succeed in it. And they can be quite insistent in tying to make you realise this "fact" of theirs.

In the process of trying to get you to be "reasonable" and see the folly in trying to pursue what they consider the "impossible" goal you have set for yourself, some will resort to tactless attempts at humour, and in some cases, ridicule your ideas and efforts outright - especially when you begin to record failures(temporary defeats). Heron however assures that this does not mean they do not love you - it's something that just happens. Again, I agree.

Regardless of whether or not they love you however, I am of the firm opionion(based on personal experiences and extensive reading) that the truth is that their actions do not produce positive benefits of love. Napoleon Hill wrote about the psychologically destructive effect this kind of behaviour has on the person on whom it is inflicted, concluding that it often results in many men and women giving up on themselves and subsequently going through life with serious inferiority complexes.

There Will Be Exceptions!

As is always the case in life, there will be exceptions to the general situation I have described above. You may be lucky to have been born into a family of entrepreneurs, who have developed a culture of passing down entrepreneurial know-how from generation to generation. In that case, starting out in business, may not sound/look, to them, as "crazy" as wanting to take up employment in a corporate organisation for instance. In fact, NOT doing so probably would!

1. Learn To Quickly Identify And Deal With Two Common Groups :

But back to the situation under consideration in this article, in which people who know you mock and ridicule you for daring to take action to see your plans through. These people will often appear in different "groups", and it would help if you learn to quickly determine who belongs where, so as to be able to decide HOW to handle him/her.

A. Those who do it to your face. Some people like they were born cynical. They always know what can go wrong or will not work. As soon as they learn you want to do something new, they immediately come after you. People like this never feel happy until they have confronted you - gleefully - with their list of "Why it won't work" ideas. But at least they confront you, and let you know what they think and where they stand. You are able to quickly develop ways and means of avoiding them, so they do not wear you down with negativity.

To paraphrase Cynthia Kersey (from her book "UNSTOPPABLE 45 Powerful Stories Of Perseverance and Triumph from People Just Like You" ), allowing negative thoughts into your mind, will produce the same effect on your dreams as injecting poison to your bloodstream would have on you. That's why I like this group better than the next group I wish to describe.

Note: People in the above group may not always stop at talking. Sometimes, from observing your rate of progress,(especially when they think you might just prove them wrong, making them lose face in front of those they tried to impress by punching holes in your ideas), they could employ direct attacks on your person/projects to stop you from succeeding. It has happened before, and you would be wise to take necessary precautions - such as giving out as little information as possible about what you're doing until absolutely necessary.(Funny that I should be the one giving this kind of advice, since I tend not to apply it myself, and have suffered nee

B. Those who do it behind your back. Some people live lives of envy and deception. And so they never tell you what they think of you/your ideas to your face. They would rather tell others. When talking to you(and those they think favour you) they speak from both sides of the mouth. When they are with you, they are all sympathetic to your cause and courteous to a fault. They make a habit of calling you ever so often to ask how you're getting on, and you find yourself telling your spouse and others how wonderful they are.

On occasion they would even contribute materially to your cause(e.g. by helping to raising capital etc). In this latter scenario, the saying "Not everyone that puts dirt on your head is your enemy, and not everyone that helps you remove dirt from your head is your friend" should be kept in mind. People being described here would do this, to gain your trust, and get closer to you. While with others, they play safe by sitting "quietly" on the fence where it concerns you, in a way they hope you will not notice. They stay close to you so just in case you succeed they can claim to have been part of it.

But they ALWAYS leave themselves enough room to wash their hands off you, if - as most others expect - you end up falling flat on your face. Either way, they never have your interest at heart, and are often in it for what they can get out of their relationship with you to make themselves look good in front of others.

Then one day you accidentally over hear them leading a series of hilarious jokes in which you are the main "object of ridicule". That's when you realise that all the time they spend with you is aimed at learning what your latest failures are, so they can return to tell others what they learnt using the privileged access they have to you. And it would hurt so much(I've been there before!). You owe yourself a duty to quickly discern these kind of people and avoid them.

2. What You Can Do To Deal With People Who Mock/Ridicule You

You may find one or more of the following ideas useful dealing effectively with those who mock and ridicule you, without your having to break anyone's bones :-).

A. Have a "Guiding Philosophy" to help you stay focussed on your goals, and also nurture your self-belief. Read my article titled "Practical Guiding Philosophies For Entrepreneurial Success" for a detailed discussion on this subject.

B. Stay FAR Away From Them: Burt Dubin challenges each person pursuing a valued goal to demand nothing less than "integrity" from everyone s/he associates with. Not to do so, he explained, would be a recipe for failure. His advice for dealing with those who fall short? Simply do away with such persons. Break the relationship. Cut off the links. Stay away subsequently - for the sake of your dreams.

Here's a true story to illustrate. In a separate article titled "Why You May Want To Rejoice When Others Mock You!", I narrated the true story of Robert Goddard, the scientist who pioneered research into rocket science, leading to the launch of the space age. In it I described how Goddard, as a result of repeated mockery and ridicule of his published theories about how rockets could be built to fly into space, chose (with the backing of a financier) to continue his work in a more private location, away from the prying eyes of nosy locals, colleagues, and most especially - journalists.

Goddard went on to record significant breathroughs, that proved his theories were correct. Decades later, he would get credit for his work(though posthumously), in addition to an "editorial apology" rendered by a major newspaper that had rubbished his ideas nearly five decades earlier!

John Johnson, the founder of Ebony Magazine reportedly fired any employee who said his goals could not be achieved. Bill Payne(in preparing for the Los Angeles Olympics) deliberately avoided contact with anyone who questioned the feasibility of projects he initiated. Most of the authors of the books from which these insights were gained, agree that associating with (or remaining accessible to) negative people can result in the slow but certain death of your dream.

C. Have Dignity In Your Difficulty/Adversity: Never let the difficulties or hardship you encounter defeat you psychologically. To ensure you achieve success, it is imperative that you hold on to your self-belief. No one is ever defeated until s/he has accepted defeat as a reality. This means even when a person has failed so many times, till s/he can no longer keep count, it would not be enough to make him/her feel like quitting.

Evidence of your self-belief would be your ability to hold your chin up, and walk with a straight back even when you have to meet/face those you know look down on you because of your current circumstances. Most people who allow their fears to keep them from venturing beyond their comfort zones to chase their dreams, will draw attention to your "suffering"(and conveniently overlook smaller successes you have already recorded) in a bid to justify themselves. Their resort to mockery and ridicule, can lead to the person on the receiving end of it developing an inferiority complex. You must NEVER let that happen to you!

Show that you have dignity in your adversity by speaking assertively/with confidence to ANYONE you meet, even when they laugh in your face - ESPECIALLY when they laugh in your face!! James Cook assured that a good sign that you are on the right track will often be when your ideas are doubted or scorned by those you share them with. You are unlikely to find people who think the way you do in the majority - at least not until you have proved yourself right.

D. Fight Back IF Necessary: In certain instances, some of these people will launch direct attacks on your person - particularly if they feel your rate of progress suggests you could succeed, and possibly make them lose face before those they have told you cannot succeed. For instance, they could deliberately begin to spread falsehood about you to others.

In my experience however, this would be a sign that you ARE doing well - hence their desperation to stop you. If that was not the case, if they were so sure that you were wrong, why would they bother to commit their effort and time to stopping you at this stage? If/when this does happen to you, weigh the options carefully, and if necessary do NOT hesitate to fight back - intelligently. An example of how you can fight back, may be to deliberately publicise their actions in a way that will make others criticise them openly(they seldom like that, and will often scurry into hiding and become silent!). Do a little creative thinking here, including exploring ways to inject what I like to call "wicked humour" :-) into your plan implementation. Some good ideas will come to you.

"Man who says it cannot be done, should not get in the way of man who wants to do it" - Chinese Proverb

E. Never Do Anything You Would Be Scared For Others To Discover. Use this self-check rule to decide. If you know what you are about to do is something you would be ashamed to tell ANYONE else about, then DO NOT do it. This is quite simple, yet we human beings can struggle with it sometimes. Maybe it's because, as they say, "Stolen Water tastes sweeter". That's why people get caught in fraudulent deals or immoral acts(e.g. extra marital affairs) even though all their lives they've been told doing these things would be bad, and have seen/heard how many others destroyed themselves by failing to heed the many warnings!

Once you have a secret(s), your life changes forever. You will always worry about how to keep others from learning about it(them). Then one person does, and begins using it against you, and it can often get worse with time. A person who wants to ridicule you would gleefully reveal as many bad things s/he knows about you to others. What's worse, you are unlikely to be able to really put up any decent resistance or defence. People who believe in you would be devastated. Those who consider you a role model would lose hope.

Please, do not have any dark secrets(or skeletons in your cupboards) - else you WILL become ripe for even more relentless attacks from people who want to mock and ridicule you. Then most of what is offered in this article will be completely useless to you.

"You will need to stand on an unshakeable pedestal of integrity to achieve authentic, lasting success in any area of endeavour" - Tayo K. Solagbade

3. Mockery, Ridicule And Rejection Sometimes Have Their Benefits - But...

I have read a number of accounts about the lives of some successful people who overcame great adversity and rejection to become successful in their chosen ventures. In a number of these cases, the persons concerned mentioned that the constant rejection, and mockery by others propelled them to work harder so as to prove wrong those who made fun of them. There is the story of an individual whose success came out of a drive to remove the stigma of having had acne as a kid.

One could argue that without the mockery and ridicule from onlookers, friends, relatives and associates, the entrepreneur may not have been driven hard enough to achieve his/her eventual success. Maybe this could have been true for some entrepreneurs, but overwhelming research evidence has shown very clearly that for the majority of human beings, the exact opposite will yield even better results.

An elaborate study of the literary accomplishment of some alumni of the University of Wisconsin, twenty years after they they had graduated provides proof that the assertion made in the above paragraph is true. Read Ted Engstrom's account - in Chapter Twelve of Zig Ziglar's book "Over The Top" - of the true story about two student groups who named themselves "Wranglers" and Stranglers" respectively.

Briefly, both were groups of young literary talents who regularly met to read/critique each other's work. The Wranglers - were all women, and the Stranglers, men. But that was where the similarity ended.

The Wranglers reviewed and gave feedback/criticism to each other using positive, encouraging and gentle language (attributes of emotionally intelligent people) for every member alike. In contrast, meetings between the Stranglers were characterised by harsh criticisms, literarily tearing each other's work apart, and giving little or no encouragement for those who failed to meet the exacting standards set.

Twenty years later, the study showed a distinct trend. None of the Stranglers had recorded ANY noteworthy literary achievement, while the Wranglers had more than five accomplished writers in their ranks - some had even won national recognition - like Majorie Kinnan Rawlings, author of "The Yearling".

The morale of the above is that, to help each other achieve our full potentials, the BEST way is to work in an atmosphere of positive cooperation and NOT negative competition. We need to build one other up in ways that will help individuals overcome their inadequacies and consolidate their strengths. Beating each other down, and creating feelings of self-doubt and fear does more damage than good. In competitive sports, we all know that many times the losing individual, if s/he continues hearing cheers of encouragement from the fans in the stands, could draw inspiration from THAT to turn the tables on the opponents even when the latter appears to have victory within his/her grasp.

Lastly, in the regard, I say this. You can kill a fly with a hammer - or use a swatter. The same result would be achieved, but the damage from using the swatter(if any!) would be much, much less. In essence I am saying that NO matter how much good these practices have done in terms of "motivating" some people to succeed in the past, so as to "spite" those who made fun of them, I believe mockery and ridicule are bad for the mind! In pursuing your coveted goal, learn to quickly identify those who love to mock and ridicule others, and STAY away from them. To do otherwise could mean the certain death of your dreams.

4. A Few Words Of Advice For Those Who Mock/Ridicule Others

Anyone reading this article can easily identify areas where s/he may have been guilty of the habits described. I will offer this piece of advice to you. If you want to help any member of your family - or a friend - get ahead in life in any chosen endeavour, start TODAY to see their good sides, and help them overcome, or better manage their not-so-good sides.

When you tell your brother (after he tells you his dream) that he’s too short to play in the school’s senior team, you are not doing anything that helps him. But when you challenge him to believe that he can do it, and go out of your way to help him achieve it, then you will ultimately help him develop a stronger spirit that could cause him to achieve just that or more.

We need to strive always to exert positive influences on others. We must stop putting others down. We must avoid laughing at others when they tell us what they hope to achieve. For any person to consciously decide to set a challenging goal or target in life for him/herself is indeed noble. So many others go through life without any goals at all, and live lives of “total anonymity”.

We need to learn to keep our skepticism/criticism in check around people who have differing ideas of their purpose in life from us. Not every child/person will be as strongly driven as others who have succeeded in the past. That does not mean that the “ideas” s/he has will not be as good or even better than any this world has so far seen. Too many ideas have been killed before the “owner” had a chance to even explore them further, just because one narrow minded and tactless “realist know-it-all” chose to ‘”advise” the person. We need to create a more suitable environment for entrepreneurial abilities and creativity to flourish in our societies.

5. Know This: Mockery and ridicule CANNOT stop an idea that will work!

“A global, twenty-four hour news network will never work.” - Network executives response to Ted Turner’s plans for CNN

The above quote provides a perfect ending for this article. Network executives, who would have been regarded as "experts" with the necessary professional competence, to accurately assess the potential benefits of Ted Turners' ideas failed to see any future for it. But Turner(thankfully) did, and today virtually everyone who watches TV knows CNN is a World Leader in news coverage.

If those "expert network executives" could have been THAT badly wrong, does it not follow that what PEOPLE say need not bother or deter you - EVEN IF they mock and ridicule your idea? The answer is obvious.

Do You Know How To Deal With People Who Mock And Ridicule You?

http://buybestbodyjewelry.blogspot.com/

Sunday, March 4, 2012

Types of Sewing Machines

There are three types of sewing machines- mechanical sewing machines, electronic sewing machines, and computerized sewing machines. Since their introduction in 1800 till 1960's, all sewing machines were mechanical. Mechanical sewing machines are controlled by a rotary wheel. They have knobs and dials to make changes in the tension or the length or width of the stitch.

Lockstitch sewing machines make use of a hook and a bobbin thread to create stitch patterns, whereas chain stitch machines use a looper to form stitches. One of the major drawbacks of chain stitching is that it is very weak and the stitch can easily be pulled apart. In addition to lock stitching and chain stitching machines, there are blind stitch and buttonhole-and-button-sewing machines that use a spreader to create stitches.

Brother

Mechanical sewing machines are less expensive and are the simplest type of sewing machine in terms of build. Bernina 1008, Kenmore 11101, Singer 6038, Elna 2005, Kenmore Mini, Kenmore 15212, and Sears Kenmore 15218 are some of the mechanical sewing machines available in the market.

By the year 1970, electronic sewing machines became popular. There are more features in an electronic sewing machine than in a mechanical sewing machine. Instead of turning knobs or dials, electronic sewing machines use button to adjust length or width of the stitch. Electronic sewing machines have motors; each one is assigned with a specific task and is run by electricity. Singer 7442, Singer 7462, Singer CE-100 Futura, Elna 3230, and Janome Decor Excel 5124 are some instances of electronic sewing machines.

Another type is the computerized sewing machine, which is very fast and easy to use. Computerized sewing machines are similar to electronic sewing machines. They use the same chips and stepper motors that are used in electronic machines. Besides, they posses a microprocessor which helps the sewing machine to accept new information in a card form and create stitching patterns based on the information loaded in the card. Singer CE-200 Quantum Futura, Singer Quantum XL-6000, Brother SE270D, and Janome 8080 are some examples of computerized sewing machine.

Types of Sewing Machines

http://bastbuyheadboards.blogspot.com/

Wednesday, February 29, 2012

Sister of the Groom Wedding Speech

Making a good sister of the groom wedding speech is an activity one would want to carry out perfectly. In essence, this means that the delivery of the wedding ceremony speech and in extension the sister of the groom wedding speech should be exceptionally good. This is to ensure that the message is delivered, both to the couple and to the invited guests. This speech should come from the heart to convey the emotional aspect of the event. The speech should also serve to move the audience to an emotional connection with the couple. This portrays the importance of the groom to the deliverer of the speech since it is not just anybody getting married, but a member of the family. Alternating humor and emotion in the wedding ceremony speech makes certain that the guests are attentive and focused.

When writing the sister of the groom wedding speech it is important to write it from the heart to make certain that the speech is personalized and to give it the emotional aspect required. This is because the sister of the groom wedding speech depicts the personal relationship between the deliverer of the speech and the groom. It may contain events that the two shared when they were young. These events have developed the bond they share as siblings. It is also nice to identify and articulate positive qualities in the bride since she is now part of the family. This will also make her feel accepted and part of the bridegroom's family. Thus, speaking to the couple directly when delivering the sister of the groom wedding speech, adds to the personal nature of the speech making showing the deep connection between the groom and the deliverer of the speech.

Brother

Incorporating humor or interesting narrations on the history spent with the groom can help balance the speech portraying both emotional and hilarious accounts. However, it is important to realize that one should not mention previous relationships or girlfriends the brother had. Hence, maintaining a light-hearted yet personal and emotional tone characterizes the sister of the groom wedding speech. This ensures that one has most of the aspect covered in the any wedding ceremony speech. It is for instance; appropriate to start with a cheerful pun. This helps capture the attention of the audience and prepare them for the sister of the groom wedding speech.

Short but equally positively charged speeches resound well with guests. This ensures that the guests are kept focused and interested for the entire period of the speech. One should maintain conciseness in the delivery to sustain concentration form the audience. However, it is important to make sure that the sister of the groom wedding speech does not miss the important details in its brevity. Finally, a good sister of the bride wedding speech should maintain its personalized touch to vocalize the connection between the deliverer of the speech and the groom. For instance:

"...my brother will certainly take care of Jen, his caring nature will undoubtedly show in their relationship. I cannot stress enough how many times this quality has applied in our childhood. He has been my friend, my father and my brother. I must say Jen is among the luckiest women in the world. May she feel the blessings that I have felt all my life with her new husband..."

Sister of the Groom Wedding Speech

http://buycellphonesmotorola.blogspot.com/ http://buyequestrian-sports.blogspot.com/ http://bestankletsjewelry.blogspot.com/

 

Brother CS6000i Sew Advance Copyright © 2011 | Template created by O Pregador | Powered by Blogger